Hogyan segíthetünk?

General

  • If you need send your device to service send it on address:

Svatoplukova 1199, 698 01 Veselí nad Moravou Csehország

  • Very important is incloud cover letter with description what is wrong with device and your address where you want send it back and telefone number
  • If is device in warranty period please incloud copy of the document

Fishing

  • Yes, we are doing service for older bite alarm.
  • In general, we recommend replacing the battery in the bite alarms once a year after the season
  • If you know that you don´t use bite alarm long time we recommend that you store it without the battery inserted
  • The receiver if turned on must still receive therefore its subscription is higher, for receivers the operating time on the battery is between 7-14 days then the battery needs to be change
  • Poor battery status is optically signaled on the receivers
  • The detection distance is in the straight line from the sensor is typically 1-2 m, this distance is standard based on the principle of the general PIR sensor function see image

GSM

  • You can use GSM communicator with any SIM cards and operator with any tariff
  • The PIN code have to be deactivated on the SIM card when it is switched on and the CLIP function ( caller ID on display) have to be activated for proper ring
  • We recommend communicator connecting with PC and through the configuration program to update the FW, downloads from the Internet the latest version of FW
  • We recommend using an external GSM antenna for example ANTGSM3
  • EMA and DIN3 are turn on by inserting a SIM card into the slot
  • The EMA is charging from a 12V autogas socket
  • No Ema can be chargé via USB cable

When you are ringing is necessarily after second ring hang up the phone

Check SIM card in your device and you have to activated function CLIP ( caller ID displayed)

  • Check on your phone if is deactive request on PIN code on your SIM card when the device is turned on and tested functionality
  • We recommend recharging the battery in EMA by inserting  the alarm into the cigarette lighter socket and after 2 ours EMA will have full battery
  • When you will do a manual install the device drivers located is in the folder where is the cofiguration program install folder name Driver
  • You can used the different USB cable, because is it standard micro USB cable
  • The device can inteligently regulate the brightness of the LED if you want you can deactive this function in the advanced settings of communicator

Küldjön nekünk egy e-mailt

A lekérdezéstől számított 24 órán belül válaszolunk.

Nem találta meg, amit keresett? Lépjen velünk kapcsolatba obchod@flajzar.cz címen

Hívjon bennünket

Itt vagyunk minden munkanapon 7:30 és 16:30 között

Készen állunk a probléma megoldására, vagy kérdezzen a +420 776 586 866 telefonszámon

Látogasson el hozzánk

Itt vagyunk minden munkanapon 7:30 és 16:30 óra között

Megtalálhat minket:

Svatoplukova 1199,
698 01 Veselí nad Moravou
Csehország

Kapcsolatfelvételi űrlap

+
PROGRAMOK
+
UTASÍTÁSOK
+
MEGFELELŐSÉGI NYILATKOZAT
+
FORMA
+
FAQ

General

  • If you need send your device to service send it on address:

Svatoplukova 1199, 698 01 Veselí nad Moravou Csehország

  • Very important is incloud cover letter with description what is wrong with device and your address where you want send it back and telefone number
  • If is device in warranty period please incloud copy of the document

Fishing

  • Yes, we are doing service for older bite alarm.
  • In general, we recommend replacing the battery in the bite alarms once a year after the season
  • If you know that you don´t use bite alarm long time we recommend that you store it without the battery inserted
  • The receiver if turned on must still receive therefore its subscription is higher, for receivers the operating time on the battery is between 7-14 days then the battery needs to be change
  • Poor battery status is optically signaled on the receivers
  • The detection distance is in the straight line from the sensor is typically 1-2 m, this distance is standard based on the principle of the general PIR sensor function see image

GSM

  • You can use GSM communicator with any SIM cards and operator with any tariff
  • The PIN code have to be deactivated on the SIM card when it is switched on and the CLIP function ( caller ID on display) have to be activated for proper ring
  • We recommend communicator connecting with PC and through the configuration program to update the FW, downloads from the Internet the latest version of FW
  • We recommend using an external GSM antenna for example ANTGSM3
  • EMA and DIN3 are turn on by inserting a SIM card into the slot
  • The EMA is charging from a 12V autogas socket
  • No Ema can be chargé via USB cable

When you are ringing is necessarily after second ring hang up the phone

Check SIM card in your device and you have to activated function CLIP ( caller ID displayed)

  • Check on your phone if is deactive request on PIN code on your SIM card when the device is turned on and tested functionality
  • We recommend recharging the battery in EMA by inserting  the alarm into the cigarette lighter socket and after 2 ours EMA will have full battery
  • When you will do a manual install the device drivers located is in the folder where is the cofiguration program install folder name Driver
  • You can used the different USB cable, because is it standard micro USB cable
  • The device can inteligently regulate the brightness of the LED if you want you can deactive this function in the advanced settings of communicator
+
KAPCSOLAT TÁMOGATÁS

Küldjön nekünk egy e-mailt

A lekérdezéstől számított 24 órán belül válaszolunk.

Nem találta meg, amit keresett? Lépjen velünk kapcsolatba obchod@flajzar.cz címen

Hívjon bennünket

Itt vagyunk minden munkanapon 7:30 és 16:30 között

Készen állunk a probléma megoldására, vagy kérdezzen a +420 776 586 866 telefonszámon

Látogasson el hozzánk

Itt vagyunk minden munkanapon 7:30 és 16:30 óra között

Megtalálhat minket:

Svatoplukova 1199,
698 01 Veselí nad Moravou
Csehország

Kapcsolatfelvételi űrlap