GSM DIN3B - GSM komunikátor ENG FW

The communicator contains two power outputs with a contact load of up to 230V/5A. It is then possible to change their status remotely using SMS messages or simply by ringing the  (for free), or use the timer and thermostat function with the connection of an external temperature sensor.

GSM-DIN3 is equipped with two universal inputs to which the contact of any sensor can be connected. You will then receive an information SMS message on your mobile phone or a call to up to 6 phone numbers if these inputs are activated.

This is a version with English firmware. 

Functions and basic features:
- the internal Li-ion battery ensures the operation of the communicator even in the event of a 230V mains voltage failure
- option to monitor the mains voltage 230V - SMS are sent when it fails and is restored
- two universal inputs with the possibility of setting the reaction to a change, disconnection or connection of the loop
- possibility to set departure and arrival time from 10 to 90 seconds
- the inputs can be switched to enable/disable input mode to connect a keyboard, RFID, remote control receiver - the device then serves as a small security control panel with the option of activating / deactivating by the access system
- each input can be named separately (text sent by SMS)
- if the inputs need to be permanently active (in watch state), they can be switched to 24h loop mode
- input for a digital temperature sensor with the possibility of automatic control of both relays (thermostat)
- information SMS in case of exceeding the set temperature or falling below the set limit
- two output relays 230V/5A (resistive load); each relay can be assigned a timer of up to 10 hours, you can choose control commands for each (e.g. TURN THE HEATING ON, TURN THE HEATING OFF...)
- you can find out the status of the device at any time using a status SMS message
- GSM-DIN3B can be easily and quickly configured using a clear and intuitive PC program - the program allows you to easily make all settings, save them and load them to and from the configuration file
- during installation, you will also appreciate the function of online detection of GSM signal strength

Technical data:
- dimensions: 90 x 36 x 58 (h x w x d)
- GSM/GPRS Quad Band 850/ 900/ 1800/ 1900 MHz
- supply voltage: 230V AC
- the communicator is backed up by an internal LI-ion battery 3.7V/330mAh
- current consumption - networked, idle state: approx. 10mA
- both relays switched on: 100mA, when charging the battery: 300mA
- max. current consumption (GSM module transmits): peak approx. 500mA
- working temperature: -20°C to +50°C
- 2 logic inputs, separated by optocouplers, active GND level
- the inputs are intended for connecting potential-free contacts!
- 1 input for a digital temperature sensor with a measurement range from -20°C to 125°C - (possibility of additional purchase under order code TC530C2 or TC530C5)
- 2 power relays 230V AC, contact current up to 5A (resistive load)
- possibility of easy configuration using PC software and USB cable, which is part of the delivery
- the device is intended for a dry environment - for outdoor installation, use a cabinet with adequate coverage
- USB micro

FLAJZAR Control Android app
The FLAJZAR Control application is intended for owners of FLAJZAR's GSM systems and replaces the tedious typing of SMS commands. It helps users remotely control or check device status. Download the app HERE.